While working on my saloon dollhouse, I decided that it needed some barrels in its storage room. I wanted a few, and I wanted them to be open inside so I could use them to store extra accessories for the action figures that I am using to populate my saloon (I mean, do the Ghostbusters actually need to have their ghost fighting equipment while playing checkers?). I discovered that my requirements would not be easy (or cheap) to find, so I would try to make them. While I was pondering this challenge, I happened to glance at what my child was drinking, and the solution presented itself.
I took an empty container and cut off the top, just above the ring that says Cash Refund information. Next, I sprayed it with Rustoleum #2 spray paint, which contains a primer for painting on plastics, and holds up pretty well.
I painted both the inside and outside of the barrel with the spray paint, then waited for it to dry completely.
Next I dug out my acrylic paints to paint on top of the Rustoleum. I use the Rustoleum as a base-coat primer to help other paints adhere to the plastic surface. If I had just painted the acrylics straight onto the plastic, the paint would easily rub off, but the primer helps prevent this. I used a mixture of different browns and blacks for the wood and bands.
After the paint was applied, I decided that I didn’t care for the writing along the top, so I chose to cover it up with a band of thin leather I had as scrap. You could also use cloth, or even cardstock.
Next I wanted a lid for the barrel.
I cut and glued a piece of thick string as a lip along the inside of the barrel, about a quarter inch below the opening. This will give the lid something to rest on so it doesn’t keep falling into the barrel.
I happened to have some very thick cardboard material left over from something, and decided it would make a nice sturdy lid. I cut out the shape I needed and then trimmed it to fit easily inside the top of the barrel, but not past the inner lip I had created with the string.
There are other possibilities–I could add a beer tap, or maybe a rack for the barrel to rest on. Thanks for looking! Feel free to comment or ask questions.