Tag: painting

The Big Antique Family Dollhouse

My newest acquisition. I was told that this dollhouse has been passed down through generations, and that it was made to resemble a family home. The previous owners decided that they didn’t have room for it and there was no longer an interest in keeping it, and so I purchased it.

Unfortunately my family recently lost the beloved real home of my grandparents, so this dollhouse came at a good time for me. It lost its family, and I lost a house. Maybe together we can find a little closure.

My ultimate plan is to turn this into my own family heirloom, as it slightly resembles my great-great-aunt’s house, which I have loved since childhood. It will only require new paint to emphasize the bricks, the addition of some small architectural details such as decorations in the roof peaks and some fancy brickwork, and replicas of a few family heirlooms.

Shortly after it arrived.

This house doesn’t fit in my real house-it’s about 3 feet square. As a consequence it resides in my garage until I can get a bigger house, or make the door bigger! It’s fine, though, as I spend a lot of time in my garage. Anyway…

First things first, I decided that I need to get functional windows made and put in, to keep out any mice or insects.

I wrapped it in seran wrap over the winter to discourage pests. This is one wall of windows completed.

Using instructions posted in another article on this blog, I made all of the windows. Yay! Next, I wanted to make brick designs that go over the windows, to more closely resemble those found on my great-great-aunt’s house.

The bricks I added aren’t exactly the same as those on my aunt’s house, but I think with some creative painting I might pull off some similarity.

Fortunately for me, the house came with a few strips of wood with ‘bricks’ left over from the siding. It wasn’t quite enough to do the whole job, so I made more by gluing sandpaper to popsicle sticks, and then cut the sticks into brick-sized pieces.

Some of the old bricks and some of my ‘new’ ones made with popsicle sticks. They were virtually the same.

Now on to paint!

The paints I used. I used the paints right out of the bottle, plus mixed them together on a pallet to make new colors that are similar shades. I wanted them all to look like similar bricks but not all the same color.
I wanted them all to look similar yet different.
One side done. I will go back to the window bricks when the sides are all painted, and then, eventually, I will paint all of the trim.

When I am done with all sides plus the windows, my plan is to put a watered-down gray wash over the whole thing to add some weathering.

Here are some photos of the inside, which has not been touched (or unfortunately cleaned) yet.

A parlor or living room?
A bedroom
The stairway
Another bedroom. Love all of those angular ceilings!
Another bedroom. It even has closets!!
Upstairs hallway, with stairs to the attic.
Another bedroom
The kitchen
Dining room

This house has lots of nice details, like closets and some built-ins, and the rooms are very big! The attic is only accessible by small windows. It does need some minor repairs, but it will be fun!

I am not sure how old this house is. When they say ‘generations’ it may just be made by grandma and given to grandchild. There is no real telling as I can see some updated items, and nothing points to this being an actual antique. It could be older, though, under its newer paint and flooring, as some houses are updated through the generations. I can say fairly confidently that it is one of a kind.

I can’t wait to get more done on this! This is my 13th dollhouse/structure. It’s nice because most of my houses have little projects that can be done on them, so I can pick and choose what I feel like working on on any given day. After the initial outside work, this house will be mostly a furniture-project house, as the inside is mostly decorated nicely already. Stay tuned for more updates!

How to paint the San Franciscan Doll House to Look Haunted or Abandoned

The San Franciscan

Recently, I was at the local Goodwill store with my 10 year old daughter, and we came upon a very dilapidated San Franciscan dollhouse for only $15. I wasn’t very interested in it, myself, because I already have a very nice Victorian mansion (the Beacon Hill, see other posts), and the San Franciscan didn’t really interest me much. My daughter, however, fell in love. She told me she would trade my Bayberry Cottage house back to me if I got her this one. I decided to go for it.

As we bought it. It needed a LOT of work. Part of the roof needed mending, parts of it weren’t attached correctly, interior walls are missing, etc. Luckily a lot of the parts were there and just needed to be reattached.

My daughter is a big fan of my haunted Beacon Hill dollhouse, and plays in it often. She has been bugging me to repaint her San Franciscan to look haunted like my Beacon Hill. I LOVED painting my Beacon Hill to look abandoned, and relished the opportunity to try it again on a different house.

After a lot of mending was done, i started putting on the first coat of paint. This is the beginning of the base coat of light gray.

First thing, I had to make a few structural repairs to the outside. I was lucky in that a lot of the missing pieces of this house were in a ziplock bag that came with it. I also had to take off and reattach a few pieces that weren’t put on correctly by a previous owner. After these initial repairs were done, we started painting.

I started with a base coat of light gray exterior paint that I had left over from previous projects. We worked it into all of the nooks and crannies of the siding, on all of the railings, and pretty much anywhere that we wanted to look aged.

After the base coat. In the background you can see the Beacon Hill decorated for Christmas. While my paints were out I was finally able to get that bright white trim at the bottom of it darkened to match the rest of the house lol!

After the gray coat is on, I let the paint dry thoroughly before moving on to the next step.

Applying the darker gray ‘dirt.’

For the next step, I found it easier to use two brushes. I used one brush to apply a small amount of a dark gray paint. I wet the second brush with water (but not sopping wet), and then brushed it over the wet dark paint. My wet brush had stiff, coarse bristles that I used to scrub the ‘dirt’ into the crevices of the siding. I scrubbed the pigment up and down, back and forth, and all around until I was satisfied with its grungy appearance.

More grunge. It’s a little thick in this photo–I think I softened it up more later.
I continued the dark gray ‘grunge’ over the whole house until I was satisfied.

After the dark gray looked satisfactory, I moved on to the next color. I wanted more contrast, so I added JUST A BIT of black. Black is a very overpowering color and I did not want to overdo it. I applied it in just a few areas, particularly the porch rails, the trim above the windows, and a little on the porch floor where I felt there might be more dirt and rot accumulated.

With a small amount of black highlights. The black is also scrubbed in (using the same method as the dark gray) to keep it more weathered looking. (My daughter has her Pokemons in it already lol).

After black, I wanted a little green as wood can get a thin film of mold on it over time. I kept the green paint watered down a LOT because it didn’t want it very strong. Just a very thin hint of it is enough.

With some green added for mold. It is very watered down. I made it stronger in some areas for interest.
Front view after the green wash was applied.

Feeling fairly satisfied with the paint, I moved on to the shingles. As they were, they looked way too new for an abandoned building, so I needed to age them somehow. Luckily, I have this handy-dandy Aged Wood Accelerator from Varathane. This was purchased in the wood stain department at Menards. So far this product has come in handy for several of my dollhouse projects.

Handy-dandy!
Here is a color comparison of the original shingles (bottom left) opposed to having them stained. A word of note- any areas of glue will not stain. If that bothers you, you could go back over those sections with a bit of matching paint. I wasn’t bothered so I just left them, as they weren’t very noticeable to me.
Final product.

We were both pretty pleased with how this project turned out. Eventually we might move on to the interior, but for now it is a blank slate for my child to decorate as she pleases. Let me know if you have any questions or comments!